Stampante laserjet hp p1005

Richieste generiche di aiuto
User avatar
wynt3r
Nuovo utente
Nuovo utente
Posts: 10
Joined: 14 September 2010, 11:03
OpenMandriva: mib-live 2010
Kernel: 2.6.33.5-desktop
Desktop: mib

Stampante laserjet hp p1005

Post by wynt3r »

Non riesco a far funzionare la stampante, la procedura d'installazione va a buon fine, ho scaricato anche diversi drive e seguendo la procedura d'installazione ogni volta mi da un errore diverso. Come SO uso Mib-live 2010 64bit. Grazie

User avatar
Dago68
Collaboratore
Collaboratore
Posts: 526
Joined: 7 December 2007, 0:40

Re: Stampante laserjet hp p1005

Post by Dago68 »

Salve wynt3r,

spesso non é facile dare soluzioni ad un problema di cui si parla genericamente e non si specifica gli errori/dettagli.

Sarebbe come andare dal dottore e dire "Dottore mi sento male" senza dire che male hai :-)

Buona giornata

Dago68

User avatar
wynt3r
Nuovo utente
Nuovo utente
Posts: 10
Joined: 14 September 2010, 11:03
OpenMandriva: mib-live 2010
Kernel: 2.6.33.5-desktop
Desktop: mib

Re: Stampante laserjet hp p1005

Post by wynt3r »

OK. Chiedo scusa se non ho specificato,
Il primo errore: manca c++
secondo errore : python-devel ecc..
terzo errore: cups ed infine ad ogni errore la connessione ad internet non funzionante.
e grazie per la risposta.

User avatar
NicCo
Amministratore
Amministratore
Posts: 4765
Joined: 6 December 2007, 19:54

Re: Stampante laserjet hp p1005

Post by NicCo »

La Mib-live 2010 64bit., ok ma
- da DVD live?
oppure
- da installazione su disco fisso?

è fondamentale specificarlo...

potrebbe essere un errore di fonti software non configurate, non ben configurate
i driver per HP si chiamano HPLIP, ma necessitano di tutta l'infrastruttura CUPS
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.

--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL

User avatar
wynt3r
Nuovo utente
Nuovo utente
Posts: 10
Joined: 14 September 2010, 11:03
OpenMandriva: mib-live 2010
Kernel: 2.6.33.5-desktop
Desktop: mib

Re: Stampante laserjet hp p1005

Post by wynt3r »

Installazione sul dico fisso.
dopo l'ultimo tentativo questo è l'errore:

Code: Select all

[cccam@localhost Scaricati]$ ./hplip-3.9.2.run
Creating directory hplip-3.9.2
Verifying archive integrity... All good.
Uncompressing HPLIP 3.9.2 Self Extracting Archive......................
...........................
...........................

HP Linux Imaging and Printing System (ver. 3.9.2)
HPLIP Installer ver. 5.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Wed-12-Jan-2011_13:25:27.log

-
note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.


INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common options.
Custom mode allows you to choose installation options to fit specific requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) : a

Initializing. Please wait...
 

INTRODUCTION
------------
This installer will install HPLIP version 3.9.2 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic, Up2date, etc).


DISTRO/OS CONFIRMATION
----------------------
Distro appears to be Mandriva Linux 2010.0.

Is "Mandriva Linux 2010.0" your correct distro/OS and version (y=yes*, n=no, q=quit) ? y


SELECT HPLIP OPTIONS
--------------------
Would you like to enable support for parallel (LPT:) connected printers? (y=yes, n=no*, q=quit) ? n


ENTER ROOT/SUPERUSER PASSWORD
-----------------------------
Please enter the root/superuser password: 
Password accepted


RUNNING PRE-INSTALL COMMANDS
----------------------------


INSTALL MISSING OPTIONAL DEPENDENCIES
-------------------------------------
warning: There are 4 missing OPTIONAL dependencies.
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency for option 'network': libnetsnmp-devel (libnetsnmp-devel - SNMP networking library development files)
warning: This installer cannot install 'libnetsnmp-devel' for your distro/OS and/or version.
warning: Option 'network' has been turned off.
warning: Missing REQUIRED dependency for option 'scan': sane-devel (SANE - Scanning library development files)
warning: This installer cannot install 'sane-devel' for your distro/OS and/or version.
warning: Option 'scan' has been turned off.
warning: Missing OPTIONAL dependency for option 'scan': xsane (xsane - Graphical scanner frontend for SANE)
warning: This installer cannot install 'xsane' for your distro/OS and/or version.
warning: Missing OPTIONAL dependency for option 'base': cups-ddk (CUPS DDK - CUPS driver development kit)
warning: This installer cannot install 'cups-ddk' for your distro/OS and/or version.


PRE-BUILD COMMANDS
------------------


BUILD AND INSTALL
-----------------
Running './configure --libdir=/usr/lib64 --prefix=/usr --enable-qt4 --enable-doc-build --disable-qt3 --disable-pp-build --disable-foomatic-drv-install --enable-foomatic-ppd-install --disable-network-build --enable-dbus-build --disable-hpijs-only-build --disable-scan-build --enable-fax-build'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make'
Please wait, this may take several minutes...
error: 'make' command failed with status code 2
[cccam@localhost Scaricati]$
Last edited by rugyada on 26 January 2011, 12:57, edited 1 time in total.
Reason: Prego usare i tag: [code] [/code], grazie.

User avatar
Dago68
Collaboratore
Collaboratore
Posts: 526
Joined: 7 December 2007, 0:40

Re: Stampante laserjet hp p1005

Post by Dago68 »

Mi sembra di capire che tu abbia la connessione internet, se si ti consiglio di configurare i repository Mandriva perché trovi quasi tutto il software che ti occorre come quello che stai cercando di installare.

Ecco delle guide utili:

http://wiki.mandriva.com/it/Fonti

e qui la guida per installare il software:

http://wiki.mandriva.com/it/Installare_ ... e_software

Buona lettura

Dago68

User avatar
wynt3r
Nuovo utente
Nuovo utente
Posts: 10
Joined: 14 September 2010, 11:03
OpenMandriva: mib-live 2010
Kernel: 2.6.33.5-desktop
Desktop: mib

Re: Stampante laserjet hp p1005

Post by wynt3r »

Ti ringrazio per la risposta e per i link, ma Il problema è che nonostante i repository aggiornati ed il software scaricato direttamente dal sit HP ecc... non riesco a farla stampare anche se la stampante viene riconosciuta.

User avatar
fonzie-two
Utente
Utente
Posts: 106
Joined: 20 February 2009, 20:56
ROSA: 2016.1
OpenMandriva: 5.0
Kernel: 5.19.4-desktop-1omv4
Desktop: Plasma 5
country: ITA

Re: Stampante laserjet hp p1005

Post by fonzie-two »

Saluti a tutti,
se la stampante e' riconosciuta, in mcc e' abilitata ?

Ti consiglio, l'installazione di stampanti hp da mcc, e non dal sito hp; l'operazione e' piu veloce.

La versione attuale di hplip e' la 3.10.2 ( nel tuo caso e' presente la 3.9.2 )
Ciaoo

User avatar
wynt3r
Nuovo utente
Nuovo utente
Posts: 10
Joined: 14 September 2010, 11:03
OpenMandriva: mib-live 2010
Kernel: 2.6.33.5-desktop
Desktop: mib

Re: Stampante laserjet hp p1005

Post by wynt3r »

Ciao, dopo tanti tentativi andati a vuoto per installare la stampante hp, dietro suggerimento di Dago ho cominciato a leggere wiki mandriva e l'errata della versione 2010 riporta:

La scansione non funziona negli scanner HP e nelle stampanti HP del tipo All-in-One

È un problema conosciuto. Il problema deriva dal pacchetto task-printing-hp. Questo pacchetto è responsabile dell'installazione dei pacchetti necessari per le stampanti e scanner HP come dipendenza. Il pacchetto task-printing-hp dovrebbe installare il pacchetto libsane-hpaio1; ma non lo fa. Gli utenti devono installare il pacchetto libsane-hpaio1 manualmente per far funzionare lo scanner.

Se aggiorno alla versione spring o alla 2010.2 risolvo il problema? o devo lasciar perdere la stampante?

User avatar
Dago68
Collaboratore
Collaboratore
Posts: 526
Joined: 7 December 2007, 0:40

Re: Stampante laserjet hp p1005

Post by Dago68 »

Se aggiorno alla versione spring o alla 2010.2 risolvo il problema? o devo lasciar perdere la stampante?
Mi sembra che vi siano nuovi pacchetti per le stampanti hp che potrebbero risolvere il tuo problema ma questo non posso assicurartelo.

Buona giornata

Dago68

User avatar
wynt3r
Nuovo utente
Nuovo utente
Posts: 10
Joined: 14 September 2010, 11:03
OpenMandriva: mib-live 2010
Kernel: 2.6.33.5-desktop
Desktop: mib

Re: Stampante laserjet hp p1005

Post by wynt3r »

ho risolto aggiornando. Grazie Dago per l'informazione.

User avatar
NicCo
Amministratore
Amministratore
Posts: 4765
Joined: 6 December 2007, 19:54

Re: Stampante laserjet hp p1005

Post by NicCo »

wynt3r wrote:ho risolto aggiornando. Grazie Dago per l'informazione.
"aggiornando" cosa, non si capisce...

a> aggiornando la stessa 2010.0
b> aggiornando 2010.0 -> 2010.2
c> installando da zero la 2010.2

Ciao, NicCo
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.

--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL

User avatar
wynt3r
Nuovo utente
Nuovo utente
Posts: 10
Joined: 14 September 2010, 11:03
OpenMandriva: mib-live 2010
Kernel: 2.6.33.5-desktop
Desktop: mib

Re: Stampante laserjet hp p1005

Post by wynt3r »

Hai ragione non sono chiaro. Aggiornando i main/backports della 2010.0 Gnome 64 bit ha stampato solo la pagina di prova, dopo non sono più riuscito a farla stampare. Sta diventando una ossessione, anche rifacendo la stessa procedura non si riesce.

User avatar
ZeRo_CoOl
Utente junior
Utente junior
Posts: 86
Joined: 16 October 2009, 8:13
OpenMandriva: 2011.0 x86_64
Kernel: 3.0.4-nrj.69mib
Desktop: KDE 4.6.5
country: Italy

Re: Stampante laserjet hp p1005

Post by ZeRo_CoOl »

Prova a controllare il cavo USB, a me era capitato un problema identico al tuo con la medesima stampante, dopo aver sostituito il cavo non ho più riscontrato problemi.
Ciao ciao.
NoThInG Is ImPoSsIbLe

Linux kernel 3.0.4-desktop-nrj.69mib x86_64 AMD Athlon(tm) II X2 250 Processor GNU/Linux ATI Radeon HD 4200 - KDE 4.6.5 on Mandriva Linux 2011.0, ofcourse :D Rappresentante Italiano Mandriva (per suggerimenti, critiche o altro contattatemi in privato)

User avatar
wynt3r
Nuovo utente
Nuovo utente
Posts: 10
Joined: 14 September 2010, 11:03
OpenMandriva: mib-live 2010
Kernel: 2.6.33.5-desktop
Desktop: mib

Re: Stampante laserjet hp p1005

Post by wynt3r »

Ho provato anche a sostituire il cavo ma il risultato è sempre lo stesso la stampante viene riconosciuta mando la stampa e rimane in attesa.
Ho provato a rifare l'installazione con il pacchetto hplip-3.10.9. e prima mancavano 6 pacchetti: gcc, gcc c++, cups, cups-devel, ed infine libusb, non riesco ad aggiornare la libreria lib64usb. Qualche suggerimento?

Configurazione Pc
ASUSTeK P5KPL-CM Intel Pentium Dual-Core CPU E5200
nVidia GE-FORCE 9400 GT
DDR2 667MHz 2 G.
Linux kernel 2.6.31.14-desktop-1mnb

Post Reply