Problemi avvio Xorg ["RISOLTO"]

Discussioni sul progetto ROSA e aiuto agli utenti
Post Reply
User avatar
Alex-G
Utente
Utente
Posts: 103
Joined: 19 September 2011, 11:49
ROSA: Rosa
OpenMandriva: OpenMandriva
Kernel: Vari
Desktop: Vari
country: IT

Problemi avvio Xorg ["RISOLTO"]

Post by Alex-G »

ROSA Fresh R6 LXQt
http://www.biostar-usa.com/ideqdetails. ... =ideq+220k
Motherboard Model: Biostar K8VGA-M/K8M800-M7A
Motherboard Chipset: VIA K8M800/K8N800 CE + VT8237(R)

Graphics: Card: Advanced Micro Devices [AMD/ATI] RV280 [Radeon 9200 SE]
Display Server: X.org 1.18.4 driver: radeon
_________________________________________________________

Xorg non si avvia o meglio mi ritorna una schermata nera; l' unica modalità con la quale si avvia è dalla recovery digitando starx. Allego un po di log:
Xorg.0.log
[ 52.275]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 52.335] X Protocol Version 11, Revision 0
[ 52.355] Build Operating System: Linux_3.10.93-1.res6.x86_64 mandriva
[ 52.376] Current Operating System: Linux user00 4.9.60-nrj-desktop-1rosa-i586 #1 SMP PREEMPT Sat Nov 4 10:20:12 UTC 2017 i686
[ 52.376] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.60-nrj-desktop-1rosa-i586 root=UUID=4a94a657-689b-4f14-865b-7bfdfb5c0008 ro single resume=UUID=a33386c1-555e-4604-b7c8-a526460e3682
[ 52.442] Build Date: 04 February 2017 11:32:01PM
[ 52.464]
[ 52.485] Current version of pixman: 0.34.0
[ 52.530] Before reporting problems, check http://bugs.rosalinux.ru/
to make sure that you have the latest version.
[ 52.530] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 52.621] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 3 20:53:47 2017
[ 52.679] (==) Using config file: "/etc/X11/xorg.conf"
[ 52.702] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 52.725] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 52.779] (==) ServerLayout "X.org Configured"
[ 52.779] (**) |-->Screen "Screen0" (0)
[ 52.779] (**) | |-->Monitor "Monitor0"
[ 52.779] (**) | |-->Device "Card0"
[ 52.779] (**) | |-->GPUDevice "Card0"
[ 52.779] (**) |-->Input Device "Mouse0"
[ 52.779] (**) |-->Input Device "Keyboard0"
[ 52.779] (==) Automatically adding devices
[ 52.779] (==) Automatically enabling devices
[ 52.779] (==) Automatically adding GPU devices
[ 52.796] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 52.797] (**) FontPath set to:
catalogue:/etc/X11/fontpath.d,
catalogue:/etc/X11/fontpath.d
[ 52.797] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 52.797] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 52.797] (WW) Disabling Mouse0
[ 52.797] (WW) Disabling Keyboard0
[ 52.797] (II) Loader magic: 0x82ba660
[ 52.797] (II) Module ABI versions:
[ 52.797] X.Org ANSI C Emulation: 0.4
[ 52.797] X.Org Video Driver: 20.0
[ 52.797] X.Org XInput driver : 22.1
[ 52.797] X.Org Server Extension : 9.0
[ 52.798] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 52.800] (--) PCI:*(0:1:0:0) 1002:5964:174b:7c26 rev 1, Mem @ 0xe8000000/134217728, 0xfa030000/65536, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[ 52.800] (--) PCI: (0:1:0:1) 1002:5d44:174b:7c27 rev 1, Mem @ 0xf0000000/134217728, 0xfa020000/65536
[ 52.800] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 52.801] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 52.801] (II) LoadModule: "glx"
[ 52.823] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 52.965] (II) Module glx: vendor="X.Org Foundation"
[ 52.965] compiled for 1.18.4, module version = 1.0.0
[ 52.965] ABI class: X.Org Server Extension, version 9.0
[ 52.965] (==) AIGLX enabled
[ 52.965] (II) LoadModule: "radeon"
[ 52.966] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 52.996] (II) Module radeon: vendor="X.Org Foundation"
[ 52.996] compiled for 1.18.4, module version = 7.8.0
[ 52.996] Module class: X.Org Video Driver
[ 52.996] ABI class: X.Org Video Driver, version 20.0
[ 52.996] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
ATI Radeon 9800PRO, ATI Radeon 9800XT,
ATI Radeon Mobility 9600/9700 (M10/M11),
ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
ATI FireGL V3350, ATI Mobility Radeon X1450,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
ATI FireGL V3400, ATI Mobility FireGL V5250,
ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
MULLINS, KAVERI, HAWAII
[ 53.000] (++) using VT number 1

[ 53.015] (II) [KMS] Kernel modesetting enabled.
[ 53.015] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 53.015] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 53.015] (==) RADEON(0): Default visual is TrueColor
[ 53.016] (==) RADEON(0): RGB weight 888
[ 53.016] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 53.016] (--) RADEON(0): Chipset: "ATI Radeon 9200SE" (ChipID = 0x5964)
[ 53.016] (II) Loading sub module "fb"
[ 53.016] (II) LoadModule: "fb"
[ 53.016] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 53.027] (II) Module fb: vendor="X.Org Foundation"
[ 53.027] compiled for 1.18.4, module version = 1.0.0
[ 53.027] ABI class: X.Org ANSI C Emulation, version 0.4
[ 53.027] (II) Loading sub module "dri2"
[ 53.027] (II) LoadModule: "dri2"
[ 53.027] (II) Module "dri2" already built-in
[ 53.027] (II) Loading sub module "exa"
[ 53.027] (II) LoadModule: "exa"
[ 53.027] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 53.032] (II) Module exa: vendor="X.Org Foundation"
[ 53.032] compiled for 1.18.4, module version = 2.6.0
[ 53.033] ABI class: X.Org Video Driver, version 20.0
[ 53.033] (II) RADEON(0): KMS Color Tiling: disabled
[ 53.033] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 53.033] (II) RADEON(0): KMS Pageflipping: enabled
[ 53.033] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 53.063] (II) RADEON(0): Output VGA-0 using monitor section Monitor0
[ 53.066] (II) RADEON(0): Output S-video has no monitor section
[ 53.096] (II) RADEON(0): EDID for output VGA-0
[ 53.096] (II) RADEON(0): Manufacturer: STN Model: 21 Serial#: 1196634423
[ 53.096] (II) RADEON(0): Year: 2004 Week: 40
[ 53.096] (II) RADEON(0): EDID Version: 1.3
[ 53.096] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 53.096] (II) RADEON(0): Sync: Separate Composite
[ 53.096] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 53.096] (II) RADEON(0): Gamma: 2.20
[ 53.096] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[ 53.096] (II) RADEON(0): First detailed timing is preferred mode
[ 53.096] (II) RADEON(0): redX: 0.633 redY: 0.351 greenX: 0.298 greenY: 0.592
[ 53.096] (II) RADEON(0): blueX: 0.143 blueY: 0.092 whiteX: 0.316 whiteY: 0.337
[ 53.096] (II) RADEON(0): Supported established timings:
[ 53.096] (II) RADEON(0): 720x400@70Hz
[ 53.096] (II) RADEON(0): 640x480@60Hz
[ 53.096] (II) RADEON(0): 640x480@67Hz
[ 53.096] (II) RADEON(0): 640x480@72Hz
[ 53.096] (II) RADEON(0): 640x480@75Hz
[ 53.096] (II) RADEON(0): 800x600@56Hz
[ 53.096] (II) RADEON(0): 800x600@60Hz
[ 53.096] (II) RADEON(0): 800x600@72Hz
[ 53.096] (II) RADEON(0): 800x600@75Hz
[ 53.096] (II) RADEON(0): 832x624@75Hz
[ 53.096] (II) RADEON(0): 1024x768@60Hz
[ 53.096] (II) RADEON(0): 1024x768@70Hz
[ 53.096] (II) RADEON(0): 1024x768@75Hz
[ 53.096] (II) RADEON(0): 1280x1024@75Hz
[ 53.096] (II) RADEON(0): 1152x864@75Hz
[ 53.096] (II) RADEON(0): Manufacturer's mask: 0
[ 53.096] (II) RADEON(0): Supported standard timings:
[ 53.096] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 53.096] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 53.096] (II) RADEON(0): Supported detailed timing:
[ 53.096] (II) RADEON(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 53.096] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 53.096] (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 53.096] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 53.096] (II) RADEON(0): Monitor name: SAMTRON
[ 53.096] (II) RADEON(0): Serial No: H9NX961921
[ 53.096] (II) RADEON(0): EDID (in hex):
[ 53.096] (II) RADEON(0): 00ffffffffffff004e8e210037315347
[ 53.096] (II) RADEON(0): 280e01036c221b782a36a1a2594c9724
[ 53.096] (II) RADEON(0): 175156bfef808180714f010101010101
[ 53.096] (II) RADEON(0): 010101010101302a009851002a403070
[ 53.096] (II) RADEON(0): 1300520e1100001e000000fd00384b1e
[ 53.096] (II) RADEON(0): 510e000a202020202020000000fc0053
[ 53.096] (II) RADEON(0): 414d54524f4e0a2020202020000000ff
[ 53.096] (II) RADEON(0): 0048394e583936313932310a202000c4
[ 53.096] (II) RADEON(0): Printing probed modes for output VGA-0
[ 53.096] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 53.096] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 53.096] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 53.097] (II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 53.097] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 53.097] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 53.097] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 53.097] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 53.097] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 53.097] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 53.097] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 53.097] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 53.097] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 53.097] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 53.097] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 53.097] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 53.100] (II) RADEON(0): EDID for output S-video
[ 53.100] (II) RADEON(0): Output VGA-0 connected
[ 53.100] (II) RADEON(0): Output S-video disconnected
[ 53.100] (II) RADEON(0): Using exact sizes for initial modes
[ 53.100] (II) RADEON(0): Output VGA-0 using initial mode 1280x1024 +0+0
[ 53.100] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 53.100] (II) RADEON(0): mem size init: gart size :1dff000 vram size: s:8000000 visible:7ac0000
[ 53.100] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 53.100] (==) RADEON(0): DPI set to (96, 96)
[ 53.100] (II) Loading sub module "ramdac"
[ 53.100] (II) LoadModule: "ramdac"
[ 53.100] (II) Module "ramdac" already built-in
[ 53.100] (--) Depth 24 pixmap format is 32 bpp
[ 53.110] (II) RADEON(0): [DRI2] Setup complete
[ 53.110] (II) RADEON(0): [DRI2] DRI driver: r200
[ 53.110] (II) RADEON(0): Front buffer size: 5120K
[ 53.110] (II) RADEON(0): VRAM usage limit set to 108489K
[ 53.124] (==) RADEON(0): DRI3 disabled
[ 53.124] (==) RADEON(0): Backing store enabled
[ 53.124] (II) RADEON(0): Direct rendering enabled
[ 53.124] (II) RADEON(0): Render acceleration enabled for R200 type cards.
[ 53.124] (II) EXA(0): Driver allocated offscreen pixmaps
[ 53.124] (II) EXA(0): Driver registered support for the following operations:
[ 53.124] (II) Solid
[ 53.124] (II) Copy
[ 53.124] (II) Composite (RENDER acceleration)
[ 53.124] (II) UploadToScreen
[ 53.124] (II) DownloadFromScreen
[ 53.124] (II) RADEON(0): Acceleration enabled
[ 53.124] (==) RADEON(0): DPMS enabled
[ 53.124] (==) RADEON(0): Silken mouse enabled
[ 53.126] (II) RADEON(0): Set up textured video
[ 53.126] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 53.126] (II) RADEON(0): [XvMC] Extension initialized.
[ 53.126] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 53.128] (--) RandR disabled
[ 53.324] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 53.324] (II) AIGLX: enabled GLX_ARB_create_context
[ 53.324] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 53.324] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 53.324] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 53.324] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 53.324] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 53.324] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 53.324] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 53.324] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 53.325] (II) AIGLX: Loaded and initialized r200
[ 53.325] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 53.325] (II) RADEON(0): Setting screen physical size to 338 x 270
[ 53.819] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 53.819] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 53.819] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 53.819] (**) Power Button: Applying InputClass "system-keyboard"
[ 53.819] (II) LoadModule: "libinput"
[ 53.819] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 53.856] (II) Module libinput: vendor="X.Org Foundation"
[ 53.856] compiled for 1.18.4, module version = 0.24.0
[ 53.856] Module class: X.Org XInput Driver
[ 53.856] ABI class: X.Org XInput driver, version 22.1
[ 53.856] (II) Using input driver 'libinput' for 'Power Button'
[ 53.856] (**) Power Button: always reports core events
[ 53.856] (**) Option "Device" "/dev/input/event2"
[ 53.856] (**) Option "_source" "server/udev"
[ 53.857] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 53.857] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 53.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 53.863] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 53.863] (**) Option "xkb_model" "pc105"
[ 53.863] (**) Option "xkb_layout" "it"
[ 53.863] (**) Option "xkb_options" "compose:rwin"
[ 53.921] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 53.921] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 53.922] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 53.922] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 53.922] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 53.922] (**) Power Button: Applying InputClass "system-keyboard"
[ 53.922] (II) Using input driver 'libinput' for 'Power Button'
[ 53.922] (**) Power Button: always reports core events
[ 53.922] (**) Option "Device" "/dev/input/event0"
[ 53.922] (**) Option "_source" "server/udev"
[ 53.923] (II) input device 'Power Button', /dev/input/event0 is tagged by udev as: Keyboard
[ 53.923] (II) input device 'Power Button', /dev/input/event0 is a keyboard
[ 53.928] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 53.928] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 53.928] (**) Option "xkb_model" "pc105"
[ 53.928] (**) Option "xkb_layout" "it"
[ 53.928] (**) Option "xkb_options" "compose:rwin"
[ 53.929] (II) input device 'Power Button', /dev/input/event0 is tagged by udev as: Keyboard
[ 53.929] (II) input device 'Power Button', /dev/input/event0 is a keyboard
[ 53.930] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 53.930] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 53.930] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 53.930] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 53.930] (II) Using input driver 'libinput' for 'Sleep Button'
[ 53.930] (**) Sleep Button: always reports core events
[ 53.930] (**) Option "Device" "/dev/input/event1"
[ 53.930] (**) Option "_source" "server/udev"
[ 53.931] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 53.931] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[ 53.936] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 53.936] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 53.936] (**) Option "xkb_model" "pc105"
[ 53.936] (**) Option "xkb_layout" "it"
[ 53.936] (**) Option "xkb_options" "compose:rwin"
[ 53.937] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 53.937] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[ 53.939] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4)
[ 53.939] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 53.939] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 53.939] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 53.939] (**) Logitech USB Optical Mouse: always reports core events
[ 53.939] (**) Option "Device" "/dev/input/event4"
[ 53.939] (**) Option "_source" "server/udev"
[ 53.991] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is tagged by udev as: Mouse
[ 53.991] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is a pointer caps
[ 53.998] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:046D:C05F.0001/input/input4/event4"
[ 53.998] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 53.998] (**) Option "AccelerationScheme" "none"
[ 53.998] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 53.998] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 53.998] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 54.050] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is tagged by udev as: Mouse
[ 54.050] (II) input device 'Logitech USB Optical Mouse', /dev/input/event4 is a pointer caps
[ 54.051] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 54.051] (II) No input driver specified, ignoring this device.
[ 54.051] (II) This device may have been added with another device file.
[ 54.052] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 54.052] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 54.052] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 54.052] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 54.052] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 54.052] (**) AT Translated Set 2 keyboard: always reports core events
[ 54.052] (**) Option "Device" "/dev/input/event3"
[ 54.052] (**) Option "_source" "server/udev"
[ 54.053] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event3 is tagged by udev as: Keyboard
[ 54.053] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event3 is a keyboard
[ 54.058] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 54.058] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 54.058] (**) Option "xkb_model" "pc105"
[ 54.058] (**) Option "xkb_layout" "it"
[ 54.058] (**) Option "xkb_options" "compose:rwin"
[ 54.059] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event3 is tagged by udev as: Keyboard
[ 54.059] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event3 is a keyboard
[ 56.418] (II) RADEON(0): EDID vendor "STN", prod id 33
[ 56.419] (II) RADEON(0): Using EDID range info for horizontal sync
[ 56.419] (II) RADEON(0): Using EDID range info for vertical refresh
[ 56.419] (II) RADEON(0): Printing DDC gathered Modelines:
[ 56.419] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 56.419] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 56.419] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 56.419] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 56.419] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 56.419] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 56.419] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 56.419] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 56.419] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 56.419] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 56.419] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 56.419] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 56.419] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 56.419] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 56.419] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 56.419] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
Kernel errors.log

Code: Select all

Aug 20 15:33:35 user00 kernel: [   15.465475] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20160831/processor_perflib-334)
Dec  3 17:51:33 user00 kernel: [   14.703668] ACPI Exception: AE_NOT_FOUND, Evaluating _PSS (20160831/processor_perflib-334)
Spoiler:  Kernel warnings.log

Aug 20 15:33:35 user00 kernel: [ 0.256256] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
Aug 20 15:33:35 user00 kernel: [ 0.325907] pci 0000:00:00.0: MSI quirk detected; MSI disabled
Aug 20 15:33:35 user00 kernel: [ 0.326168] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Aug 20 15:33:35 user00 kernel: [ 1.567362] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Aug 20 15:33:35 user00 kernel: [ 1.569107] microcode: AMD CPU family 0xf not supported
Aug 20 15:33:35 user00 kernel: [ 2.824651] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Aug 20 15:33:35 user00 kernel: [ 5.947476] audit_printk_skb: 30 callbacks suppressed
Aug 20 15:33:35 user00 kernel: [ 6.274085] systemd: 17 output lines suppressed due to ratelimiting
Aug 20 15:33:35 user00 kernel: [ 19.065863] audit_printk_skb: 114 callbacks suppressed
Aug 20 15:33:35 user00 kernel: [ 21.383755] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Aug 20 15:33:35 user00 kernel: [ 89.990276] audit_printk_skb: 24 callbacks suppressed
Dec 3 17:51:33 user00 kernel: [ 0.248732] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
Dec 3 17:51:33 user00 kernel: [ 0.314954] pci 0000:00:00.0: MSI quirk detected; MSI disabled
Dec 3 17:51:33 user00 kernel: [ 0.315031] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Dec 3 17:51:33 user00 kernel: [ 1.434368] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Dec 3 17:51:33 user00 kernel: [ 1.435885] microcode: AMD CPU family 0xf not supported
Dec 3 17:51:33 user00 kernel: [ 2.519613] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Dec 3 17:51:33 user00 kernel: [ 6.120047] systemd: 18 output lines suppressed due to ratelimiting
Dec 3 17:51:33 user00 kernel: [ 8.361515] audit_printk_skb: 120 callbacks suppressed
Dec 3 17:51:33 user00 kernel: [ 18.667519] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Dec 3 17:51:33 user00 kernel: [ 18.869712] audit_printk_skb: 24 callbacks suppressed
Dec 3 17:51:33 user00 kernel: [ 35.505200] audit_printk_skb: 42 callbacks suppressed
Dec 3 17:51:33 user00 kernel: [ 214.580530] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\IP) (20160831/utaddress-247)
Dec 3 19:10:13 user00 colord[20687]: failed to get session [pid 20685]: Device o indirizzo non esistente
Dec 3 19:10:16 user00 colord[20687]: failed to get session [pid 20691]: Device o indirizzo non esistente
Dec 3 19:10:36 user00 colord[20687]: failed to get session [pid 20736]: Device o indirizzo non esistente

ALcuni errori probabilmente non sono correlati al problema in oggetto, se c'è bisogno di altri log, fatemi sapere.
Grazie
Last edited by Alex-G on 11 December 2017, 17:15, edited 3 times in total.

User avatar
NicCo
Amministratore
Amministratore
Posts: 4739
Joined: 6 December 2007, 19:54

Re: Problemi avvio Xorg

Post by NicCo »

ROSA Fresh R6 LXQt
R6?

[PostEdit]
Dal tuo Xorg.0.log, vedo che il kernel è il 4.9.60, allora dovrebbe trattarsi di ROSA R10,
ma la ISO di LxQt è una preview, vecchia, non è quella finale, quindi è meglio aspettare

se stai usando questa:
https://abf.rosalinux.ru/platforms/rosa ... oducts/186
puoi vedere, ha oltre due mesi, è quindi una beta...

Code: Select all

About product rosa2016.1_lxqt	26 Sep 2017, 14:46 (2 months ago)
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.

--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL

User avatar
Alex-G
Utente
Utente
Posts: 103
Joined: 19 September 2011, 11:49
ROSA: Rosa
OpenMandriva: OpenMandriva
Kernel: Vari
Desktop: Vari
country: IT

Re: Problemi avvio Xorg

Post by Alex-G »

NicCo wrote:
ROSA Fresh R6 LXQt
R6?
HAi ragione.... :lol:
dal boot.log (non posso guardare direttamente perché il PC è in un ufficio e prima di domani non posso accederv)
ROSA Desktop Fresh R9 EE 2016.1
Con gli ultimi aggiornamenti
è stato un copiaincolla sbagliato :(

Se c'è bisogno di qualche altro log, li ho copiati tutti.

User avatar
NicCo
Amministratore
Amministratore
Posts: 4739
Joined: 6 December 2007, 19:54

Re: Problemi avvio Xorg

Post by NicCo »

Alex-G wrote: ROSA Desktop Fresh R9 EE 2016.1
Con gli ultimi aggiornamenti...
Ecco è tutta qui la cosa...
Mi dici che hai ancora R9 "con gli ultimi aggiornamenti" quando diversamente dovresti essere già da molto tempo, da circa un mese, sulla nuova R10...

La cosa mi ricorda la discussione da me iniziata, qualche giorno addietro!
Mi risultava assai strano essere l'unico a cui era capitato, ben due volte...


Controlla qui, mi sembra lo stesso problema:
ROSA R9 Plasma non si aggiorna ad R10, infine si corrompe...
viewtopic.php?f=54&t=4702
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.

--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL

User avatar
Alex-G
Utente
Utente
Posts: 103
Joined: 19 September 2011, 11:49
ROSA: Rosa
OpenMandriva: OpenMandriva
Kernel: Vari
Desktop: Vari
country: IT

Re: Problemi avvio Xorg

Post by Alex-G »

NicCo wrote:
Alex-G wrote: ROSA Desktop Fresh R9 EE 2016.1
Con gli ultimi aggiornamenti...
Ecco è tutta qui la cosa...
Mi dici che hai ancora R9 "con gli ultimi aggiornamenti" quando diversamente dovresti essere già da molto tempo, da circa un mese, sulla nuova R10...

La cosa mi ricorda la discussione da me iniziata, qualche giorno addietro!
Mi risultava assai strano essere l'unico a cui era capitato, ben due volte...

Controlla qui, mi sembra lo stesso problema:
ROSA R9 Plasma non si aggiorna ad R10, infine si corrompe...
viewtopic.php?f=54&t=4702
mmmhhhh.....

quella la installai un paio di mesi fa molto prima degli aggiornamenti , mai riuscito a fare login dall' utente, non ha mai funzionato, non ci era mai arrivato allo schermo di login: appare il cursore un attimo e poi più nulla, sullo schermo LCD mi appariva una scritta tipo "fuori sincrono", quindi lasciai perdere in attesa di trovare una soluzione (è un PC in dual boot con XP, quindi al momento usano XP ma dovendo fare un passaggio ad altro sistema avevo appunto optato x Rosa) potrei provare un DE diverso ma non arriva proprio alla schermata di login.

Forse è lo stesso bug magari si è manifestato in modo diverso ma in questo caso non saprei proprio come cambiarte DE, magari se disabilito l' avvio automatico di Xorg e lascio solo il terminale...

Però avevo provato con CTRL+F2 e su un altro terminale ci arriva ma .... vedo com un continuo flash... tra un flash e l' altro riesco a digitare dei comandi... tipo ... reboot :cry:

la mia sensazione è che sia proprio qualcosa che riguarda Xorg...

User avatar
NicCo
Amministratore
Amministratore
Posts: 4739
Joined: 6 December 2007, 19:54

Re: Problemi avvio Xorg

Post by NicCo »

Anche da me la causa, almeno in uno dei due casi riscontrati, quello con scheda nvidia proprietario, era colpa di xorg, ma nell'altro caso c'era sol un driver free Intel xorg,

ma strano che reinstallando adesso nuovamente tutto con la ISO di ROSA R10 Plasma 5, tutto funziona!

Quindi, almeno per i miei due casi, sembra che sia avvenuto qualcosa di inusuale e invalidante durante una sequenza di aggiornamento, forse di xorg, forse di nvidia, forse di plasma, booohh...

Ho salvato le /home e ho installato la R10, ho perso meno tempo così che arrovellarmi sul perchè e percome,,,
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.

--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL

User avatar
Alex-G
Utente
Utente
Posts: 103
Joined: 19 September 2011, 11:49
ROSA: Rosa
OpenMandriva: OpenMandriva
Kernel: Vari
Desktop: Vari
country: IT

Re: Problemi avvio Xorg

Post by Alex-G »

Non avrei nessun problema anche a piallare le partizioni e reinstallare tutto daccapo, l' unica scocciatura è la reinstallazione delle app da installare selezionate con tanta pazienza (magari me le segno in un elenco) ma prima voglio provare a disinstallare solo la sezione grafica xorg e rimetterlo daccapo, hai visto mai che....

User avatar
GvMariani
Collaboratore
Collaboratore
Posts: 610
Joined: 27 July 2009, 11:31
ROSA: 2016.1 Fresh R10
OpenMandriva: -
Kernel: 4.19.13-nrj-desktop
Desktop: Plasma 5
country: Italy
Location: Cologno Monzese (MI) - Italia

Re: Problemi avvio Xorg

Post by GvMariani »

Alex-G wrote:ROSA Fresh R6 LXQt
http://www.biostar-usa.com/ideqdetails. ... =ideq+220k
Motherboard Model: Biostar K8VGA-M/K8M800-M7A
Motherboard Chipset: VIA K8M800/K8N800 CE + VT8237(R)

Graphics: Card: Advanced Micro Devices [AMD/ATI] RV280 [Radeon 9200 SE]
Display Server: X.org 1.18.4 driver: radeon
ALcuni errori probabilmente non sono correlati al problema in oggetto, se c'è bisogno di altri log, fatemi sapere.
Grazie
Il log di Xserver che hai postato non mostra nessun errore di X, quindi il server si avvia:
quindi se hai una schermata nera è probabilmente un problema di DE...
Se riesci ad accedere ad una VT (via alt+Fx), potresti guardare che cosa c'è dentro nel file .xsession-errrors che trovi nella tua home...

GvM

User avatar
Alex-G
Utente
Utente
Posts: 103
Joined: 19 September 2011, 11:49
ROSA: Rosa
OpenMandriva: OpenMandriva
Kernel: Vari
Desktop: Vari
country: IT

Re: Problemi avvio Xorg

Post by Alex-G »

OK il problema si è "risolto" da solo: la sysboard è deceduta mentre stavo reinstallando la versione aggiornata di rosa fresh 10... :cry: però per un attimo Xorg si era avviato... magra soddisfazione :cry:

User avatar
NicCo
Amministratore
Amministratore
Posts: 4739
Joined: 6 December 2007, 19:54

Re: Problemi avvio Xorg ["RISOLTO"]

Post by NicCo »

a volte le sysboard che sembrano andate, dopo qualche reset hardware, resuscitano senza spiegazioni apparenti, nè della loro morte nè del loro ritorno...
mi è capitato molte volte, prova a staccare tutti i cavi, anche quelli dell'alimentatore sulla m/b, stacca anche la batteria rtc, poi trova il jumper apposito e fai un reset ai valori di fabbrica, rimetti il jumper a posto, e poi riattacca i cavi, e riprova,
io controllerei anche lo stato dell'alimentatore, e quello delle ram (prova a rimuoverle, pulire i contatti, e rimetterle a posto)

ad un amico mio, che aveva messo la sua m/b da parte perchè non accendeva più in nessun modo, poi dopo una settimana in cui era rimasto spento, ad una riprova è tornato a funzionare, e adesso funziona da oltre tre mesi consecutivi, a volte accadono cose che non sembrano aver senso...
.
--- Professional experience ---
Kernel designer, engineer, maintainer and tester for ROSA Desktop and OpenMandriva Lx O.S.

--- currently I'm playing with ---
LTS Kernels > Linux 4.1.12-nrjQL <<< Linux 3.18.17-nrjQL <<< Linux 3.14.46-nrjQL
EOL Kernels > Linux 3.19.8-nrjQL <<< Linux 3.17.8-nrjQL <<< Linux 3.15.10-nrjQL

User avatar
Alex-G
Utente
Utente
Posts: 103
Joined: 19 September 2011, 11:49
ROSA: Rosa
OpenMandriva: OpenMandriva
Kernel: Vari
Desktop: Vari
country: IT

Re: Problemi avvio Xorg ["RISOLTO"]

Post by Alex-G »

Già fatto tutto.... resettato il bios, staccate tutte le schede e i dischi: si accende ... parte il ventolone posteriore ma non si avvia la fase di post; a dire il vero qualche tempo fa (quando c' era solo WinXp) aveva già fatto uno scherzo simile e poi si era "ripresa" , ora "encefalogramma piatto", si vede che stava già cedendo, probabilmente a guardare meglio si potrà scorgere qualche condensatore "gonfiato", a volte muoiono lentamente poi alla successiva riaccnesione ... non si svegliano più. La ram sono 2x1GB DDR400 praticamente nuove comprate l' estate scorsa (che riciclerò su un altra board).

Sta li ... posso anche continuare a tentare una rianimazione ma del resto è una macchina che ha funzionato egregiamente dal 2005 ;) forse era anche l' ora che rendesse l' anima al creatore.

User avatar
andreas
Utente
Utente
Posts: 281
Joined: 1 November 2008, 20:03

Re: Problemi avvio Xorg ["RISOLTO"]

Post by andreas »

Già,
che io sappia nessun costruttore si spinge a simulare periodi di vita superiori ai 10 anni per i propri chip (forse alla NASA, chissà).
AndreaS

Procio Intel i7-4930k, mobo Asus X79-Deluxe, Adaptec raid 7805, Nvidia Quadro 6000 - Rosa Fresh R3 X64

Post Reply