Kernel 3.18.3 for ROSA 2012 2012.1 2014.1 OMV2013 2014 2015

[NicCo]

Kernel 3.18.3 for ROSA 2012 2012.1 2014.1 OMV2013 2014 2015

Kernel 3.18.3 for ROSA 2012lts, rosa2012.1, omv2013.0, omv2014.0, rosa2014.1 and cooker (omv2015.0)

Kernel 3.18 arrives ASAP in its complex nrj & nrjQL flavours, for ROSA and OpenMandriva Linux OSes!

This is the third version of "nrj/nrjQL" stable 3.18.x, in its early development stage,
all the features have been already added and completed, so it should be a safe update...

Kernel 3.18.3 - http://lwn.net/Articles/629849/


Our changelog

Code: Select all

%changelog

* Tue Jan 27 2015 Nicolo' Costanza <abitrules@yahoo.it> 3.18.3-1
+ update to 3.18.3 - stable 
- drop # block fixes patches that now are already in mainstream 
- small fixes and cleanups
- ---------------------------------------------------------------------
- Kernel 3.18 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- The rel (-1) (mainline serie), with official kernel sources and addons,
- the rel (-69) will be used for development and experimental flavours,
- instead (-70) is born by the -1 % -69 merge, can generate all flavours
- Yin & Yang (69) release - it's a very complete kernel flavour sets
- ---------------------------------------------------------------------

* Fri Jan 23 2015 Nicolo' Costanza <abitrules@yahoo.it> 3.18.2-1
+ update to 3.18.2 - stable 
- add a patch to fix performance issue:
- x86-vdso-Use-asm-volatile-in-__getcpu.patch
- add a patch for iwlwifi:
- net-wireless-iwlwifi-mvm-fix-Rx-with-both-chains.patch
- ---------------------------------------------------------------------
- Kernel 3.18 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- The rel (-1) (mainline serie), with official kernel sources and addons,
- the rel (-69) will be used for development and experimental flavours,
- instead (-70) is born by the -1 % -69 merge, can generate all flavours
- Yin & Yang (69) release - it's a very complete kernel flavour sets
- ---------------------------------------------------------------------

* Wed Jan 21 2015 Nicolo' Costanza <abitrules@yahoo.it> 3.18.1-1
+ update to 3.18.1 - stable
+ it's first version of "nrj/nrjQL" stable 3.18.x, in early development
- stage, so, it's only for testing purposes, please, dont use this srpm,
- for your daily PC working, because is still to fix all over!!!
- all the defconfigs have been prepared for the 3.18 series
- all the patches have been added/update for the 3.18 series
- all the kernel specs have been updated to the 3.18 series
- all custom openmandriva/rosa features have been backported from previous
- ---------------------------------------------------------------------
- Kernel 3.18 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- The rel (-1) (mainline serie), with official kernel sources and addons,
- the rel (-69) will be used for development and experimental flavours,
- instead (-70) is born by the -1 % -69 merge, can generate all flavours
- Yin & Yang (69) release - it's a very complete kernel flavour sets
- ---------------------------------------------------------------------

* Mon Jan 12 2015 Nicolo' Costanza <abitrules@yahoo.it> 3.17.8-1
+ update to 3.17.8 - stable
- ---------------------------------------------------------------------
- Kernel 3.17 for mdv 2010.2, 2011.0, cooker, rosa.lts2012.0, rosa2012.1
- MIB (Mandriva International Backports) - http://mib.pianetalinux.org/
- The rel (-1) (mainline serie), with official kernel sources and addons,
- the rel (-QL) will be used for development and experimental flavours,
- instead (-ONE) is born by the -1 % -69 merge, can generate all flavours
- Yin & Yang (69) release - it's a very complete kernel flavour sets
- ---------------------------------------------------------------------

Build status & Availability

I remind you the base repo address for kernels 3.18 link:
http://abf.rosalinux.ru/downloads/kerne ... epository/

The rpms will be available for for rosa2012lts, rosa 2012.1, omv2013, omv2014, cooker
These below are the rebuilds right now in progress... related to the new kernel 3.18.3

nrj >>> https://abf.rosalinux.ru/kernels_3_18x/ ... uild_lists
- kernel-nrj-desktop

nrjQL >>> https://abf.rosalinux.ru/kernels_3_18x/ ... uild_lists
- kernel-nrjQL-desktop



VMWare virtualization

NEWS:
With current VMware 11 / VMPlayer 7: everything works without requiring any unofficial patching

General Info about kernel 3.18
http://kernelnewbies.org/Linux_3.18


let me know your feedback...
bye, NicCo

[oiram73]

Firme errate a parte qui tutt'ok!

Code: Select all

[mario@localhost ~]$ inxi -F
System:    Host: localhost.localdomain Kernel: 3.18.3-nrjQL-realtime-1omv x86_64 (64 bit) 
           Desktop: KDE 4.14.3 Distro: OpenMandrivaLinux 2014.0 Phosphorus
Machine:   Mobo: SAMSUNG model: 305V4A/305V4A version: 04PW
           Bios: American Megatrends version: 04PW.ME99.20110908.SKK date: 09/08/2011
CPU:       Quad core AMD A8-3510MX APU with Radeon HD Graphics (-MCP-) cache: 4096 KB flags: (lm nx sse sse2 sse3 sse4a svm) 
           Clock Speeds: 1: 1800.00 MHz 2: 1800.00 MHz 3: 1800.00 MHz 4: 1800.00 MHz
Graphics:  Card-1: Advanced Micro Devices [AMD/ATI] BeaverCreek [Radeon HD 6620G] 
           Card-2: Advanced Micro Devices [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] 
           X.Org: 1.15.1 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1366x768@60.07hz 
           GLX Renderer: Gallium 0.4 on AMD SUMO GLX Version: 3.0 Mesa 10.2.9
Audio:     Card-1: Advanced Micro Devices [AMD] FCH Azalia Controller driver: snd_hda_intel 
           Card-2: Advanced Micro Devices [AMD/ATI] BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series] driver: snd_hda_intel 
           Sound: Advanced Linux Sound Architecture ver: k3.18.3-nrjQL-realtime-1omv
Network:   Card-1: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) driver: ath9k 
           IF: wlan0 state: up mac: e8:11:32:e3:70:fa
           Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 
           IF: eth0 state: down mac: e8:11:32:df:02:75
Drives:    HDD Total Size: 120.0GB (75.8% used) 1: id: /dev/sda model: Samsung_SSD_840 size: 120.0GB 
Partition: ID: / size: 24G used: 12G (53%) fs: ext4 ID: /home size: 83G used: 73G (89%) fs: ext4 
           ID: swap-1 size: 4.19GB used: 0.00GB (0%) fs: swap 
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 78.1C mobo: N/A gpu: 77.0,N/A 
           Fan Speeds (in rpm): cpu: N/A 
Info:      Processes: 235 Uptime: 2 min Memory: 952.1/5446.7MB Client: Shell (bash) inxi: 1.9.18 
[mario@localhost ~]$ 

Code: Select all

[mario@localhost ~]$ systemd-analyze 
Startup finished in 4.735s (kernel) + 3.499s (initrd) + 5.679s (userspace) = 13.914s
[mario@localhost ~]$

[Alexander83]

Update my machines: all work fine! Thanks NicCo!